Our RF system line has been designed as variable as the current market requires. The line of antennas consists of aluminum profile frames in an open and transparent acrylic version, available with an optional advertising panel for specific clients. This range is also complemented with
a fully acrylic design antenna with integrated decoration light for the high end retailers with RGBW light panel.
Our designer frames and systems are compatible with various ADD ON products such as metal detector, people counter, IN/OUT alarm, key lock, etc. to enable various customized applications.
RAKO provides RF systems in both MONO and TXRX technologies.
Like other EAS technologies, swept-rf uses a transmitter to create a surveillance are where tags and labels are detected. The transmitter sends a signal that varies between 7.4 and 8.8 Mhz (millions of cycles per second), which is why it is called swept; is sweeps over a range of frequencies.
The transmitter signal energizes the swept-rf tag or label, which is composed of a circuit containing a capacitor and an inductor or coil, both of which store electrical energy. When connected together in a loop, the components can pass energy back and forth or “resonate”. The frequency at which the circuit resonates is controlled by matching the storage capacity of the coil and capacitor. The tag responds by emitting a signal that is detected by a receiver. In addition to the small tag signal, the receiver also responds to the much larger transmitter signal. By detecting a phase difference between these two signals, and other properties of the tag signal, the receiver recognizes of a tag and generates an alarm.
RF Sytems are availble as mono antennas to use them as standalone, or as dual system where you can use multiple antennas. In order to use teh security features, you only need RF Label such as paper hangs tags, sew in label oder hard tags.
Subject to specific antenna models
Alarm module (IN/OUT alarm, sound alarm options)
RF – ACCESSORIES.
Find out more about our high speed deactivators and tag checking hand verifiers.
RF DEACTIVATOR LTD-200
HIGH SPEED LABEL DEACTIVATOR
RAKO’s high speed label deactivator combines deactivation and detection function. Due to an inbuilt beeper the deactivator allows for sound check of successful label deactivation or in case of no deactivation a constant beep will alert you that the deactivation process was unsuccessful. Due to the integrated receiving feature you can also use our LTD-200 as a tag checker. Enables connection of the single loop pad inside barcode scanners.
Up to 25 cm deactivation height
Integrated beeper and LED
High deactivation power
Interlock possibility with POS scanner
RF HAND VERIFIER & DEACTIVATOR
Our Hand Verifier offers dual functionality combining tag checking with label deactivation. You switch between the modes using a selection switch. The unit is powered by a rechargeable high capacity power polymer battery enabling 500 or more verifying or deactivation cycles.
Up to 20 cm detection distance
Up to 15 cm deactivation distance
Mode indication LED
High deactivation power
Key lock to prevent unauthorized deactivation
Continuous beep in case of deactivation failure
Short beep when deactivated
RF DEACTIVATOR PAD
The Deactivator Pad is supplied as an external accessory for our RF Deactivator LTD-200. Available in black colour with beveled edges.